EasyManua.ls Logo

Spudnik 6740 - General

Spudnik 6740
195 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Par ts Ma nual 6740 Har vest er
Part #: 290360
Revision: 5/24/2022
ix
General
Designated use of the machine:
The Spudnik 66740 Harvester is designed exclusively for normal agricultural operations, which is its designated use.
Using the machine for other purposes or exceeding its designated limits shall be considered contrary to the designated
use. The manufacturer shall not be liable for any damages caused as a result of such use. The user shall be solely
responsible for such risks.
Operating the machine in accordance with its designated use also includes observing the instructions specified in the
Owner/Operator manual and complying with the inspection and maintenance directives.
The machine may only be operated, serviced, and repaired by persons who are familiar with the machine and have been
informed of the possible dangers.
In order to prevent dangerous situations, the information contained in this manual must be read and observed by all
persons who operate, service, or check this machine. Particular attention should be paid to the “Safetysection. Any
instructions which are not understood must be clarified before initial operation of the machine. In such cases, please
consult your Spudnik agent or contact Spudnik directly.
Unauthorized modification and/or the use of spare parts, accessories, and auxiliary equipment not supplied and/or not
approved by Spudnik can have a detrimental effect on the structural integrity and/or functionality of the machine. Any
such modification could compromise the engineered safety controls designed to prevent accidents and/or result in
machine damage. Spudnik does not accept liability for any damage resulting from this.
Conversions of, or modifications to the machine, may only be carried out after consultation with and authorization by
Spudnik.
Technical data, dimensions, and weights, are not binding. Spudnik reserves the right to make modification in the course
of further engineering developments.
Front and rear, right and left, are always referenced in the direction of normal travel.
Direction of Travel
Left Side
Right Side
Rear
Front
Figure 2

Table of Contents

Related product manuals