Spudnik 6740 - Lubricant Specifications; Fluids and Lubricants; Storing Lubricants

Par ts Ma nual 6740 Har vest er
Part #: 290360
Revision: 5/24/2022
181
Section-X TBD Section-5 Miscellaneous Specifications & Reference
5.4. Belted Chain repair (Cont.)
clearance for the drive sprockets to engage
the Belted Chain. (See Figure 19)
Figure 19
The Web Joiner on the Vine Belted Chain uses a
Locking Pin rather than a full width Connecting Rod.
NOTE
5.5. Lubricant Specifications
5.5.1. Fluids and Lubricants
1. Grease: Shell Retinax EP2 multipurpose
grease (or equivalent).
2. Gearbox Lube: 80W90 gear oil.
3. Roller Chains: Spudnik chain lubricant, PN
991707 or equivalent industrial chain spray.
4. Hydraulic Oil: AW32
5.5.2. Storing Lubricants
1. Store as specified on the container label.
As with all chemicals:
Store lubricants in original containers.
Protect lubricants from dust, moisture, contamination,
fire, etc.
Wash thoroughly if physically exposed to lubricants.
Always wear proper protective equipment when
handling lubricants.
Always follow instructions and warnings on the MSDS.
CAUTION!
AW32 hydraulic oil is for use in self hydraulic systems
only. The oil is not compatible with the hydraulic oil
used in the tractor.
IMPORTANT