Spypoint FLEX - Memory Card Management; Installing a Memory Card; Memory Card Capacity Table; Continuous Mode Operation

8
FLEXSPYPOINT
INSTALLING A MEMORY CARD (NOT INCLUDED)
The use of a memory card is necessary for the operation of the camera. It is used to save photos, videos and
other camera status les. Note that photos and videos in their original format are kept on the memory card.
The les sent to your application are lighter versions. You can retrieve your photos and videos at any time by
removing the card from the camera and transferring the contents to another device (e.g.: computer).
Your camera requires a microSD memory card, with a maximum capacity of 512 GB, sold separately. Here is
a table showing the approximate quantity of photos or videos that can be recorded on the card, according
to dierent memory card capacities.
INSERTING YOUR MEMORY CARD
• Ensure the camera is turned OFF.
• Find the microSD card slot. It is located at the bottom
of the camera (see photo).
• Insert a microSD card (up to 512GB) in the microSD
card slot with the metal contacts facing up.
• The card is inserted correctly when a click is heard.
MEMORY
4 GB 16 GB 32 GB 128 GB 512 GB
PHOTOS (33 MP)
1,900 7,600 15,200 60,800 243,200
VIDEOS (1080P)
684 2,736 5,472 21,888 87,552
NOTE
The FLEX is equipped with continuous mode.
This means that when the memory card is full, the
camera continues to save your photos and videos
by erasing the rst recorded les.
Memory Card