Spypoint FORCE-11 - Page 12

12
Settings
FORCE
PHOTO SETTINGS
Sets the options of the PHOTO mode.
Delay:
(Instant/10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection before
the camera records the next photo. A longer delay minimizes the number
of photos taken and maximizes the battery life. A shorter delay maxi-
mizes the number of photos taken but requires more battery power. The
shorter times interval are recommended when the camera is used for
security purposes.
Multi-shot:
(1/2/3/4/5/6 consecutive shots)
Takes up to 6 consecutive shots at each detection, with a 10-second
delay between each photo. This option allows the user to get up to 6
photos from different angles when the camera is in PHOTO mode.
TIME LAPSE SETTINGS
Sets the options of the TIME LAPSE mode.
Interval:
(30s/1m/3m/5m/15m/30m/1h)
Allows the camera to take photos at regular preset intervals. For example,
if the option "5m" is selected in the TIME LAPSE mode, the camera takes
a photo every 5 minutes even if there is no detection. This option allows
the user to obtain photos of game outside the detection range of the
camera.
Note: The TIME LAPSE mode only applies for photos, not videos. When
the TIME LAPSE mode is selected, the DELAY option and the MULTI-SHOT
mode are disabled.
VIDEO SETTINGS
Sets the options of the VIDEO mode.
Delay:
(10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection before
the camera records the next video. A longer delay minimizes the number
of videos taken and maximizes the battery life. A shorter delay maximizes
the number of videos taken but requires more battery power. The shorter
times interval are recommended when the camera is used for security
purposes.
Video length:
(10s/30s/60s/90s)
Allows the user to select the duration of the recording when the camera
is set in VIDEO mode.
Photo rst
When this option is enabled, a photo is taken immediately before each
video.
Note: The le name of the photocorresponds tothe digit before the
videolename.Forexample,ifthenameofthephotoisPICT001,the
name of the video will be PICT002.



Recommended settings
Thecameracanbeconguredforusage in trails. This situation usually
presents low activity level, fast subjects and a small number of photos is
expected. These settings increase the chances of capturing animals that
follow each other.
Thecameracan alsobecongured forusage at a feeder's site. This
situation usually presents high activity level, slow subjects and a large
number of photos is expected. These settings moderate the number of
photos taken while capturing overall activity on feeder's site.
Here is a table showing the suggested settings for each situation:
Trail Feeder
Delay Instant 5 min
Multi-shots 1 2-3
When these recommended settings are not adapted to the situation,
battery life can be affected.