Spypoint LINK-MICRO-LTE - Advanced Configuration Options; Display and Timing Settings; Operation and Photo Quality Settings; Resetting Configuration

14
LINK-MICRO-LTESPYPOINT
ADVANCED CONFIGURATION
OTHER CONFIGURATIONS
RESET TO DEFAULT SETTINGS
Activated/not activated
Allows you to reset the camera to its original state.
DATE FORMAT
MM/DD/YYYY or DD/MM/YYYY
Allows you to choose the date format displayed.
TIME FORMAT
12 h or 24 h
Allows you to choose the time format displayed.
TEMPERATURE UNIT
°C/°F
Allows you to choose the temperature unit format displayed.
OPERATING PERIOD
24 h/7 days
Allows you to choose the hours of operation of the camera, for each day, over a 1-week period.
The selected start and stop times will determine the times during which the camera will be on and take pictures.
For a 24-hour operation, the start and stop times should both be 00:00 or 12:00.
NOTE: You can adjust the hour format to 12 or 24 hours. Refer to the “Time Format” option.
TRIGGER SPEED
Optimal/fast
Allows you to choose the trigger speed of the image sensor. The “optimal” trigger speed provides better image quality but
may cause you to miss a fast-moving subject. On the other hand, a fast trigger speed ensures that the fast-moving subject
will be photographed, but the picture may be of poorer quality.
PHOTO QUALITY
High/normal
Allows you to determine the quality of the photos saved on your microSD card.
High quality: 10 Mpx (4,096 x 2,304) or normal quality: 2 Mpx (1,920 x 1,080).
CELLULAR MODE
Activated/not activated
Allows you to activate or deactivate the cellular mode. Note that this setting will only take eect
the next time the camera makes a transfer.
Configuration