Spypoint LINK-MICRO-LTE - Camera Configuration Settings; Basic Configuration Options; Cellular Transmission Settings

13
LINK-MICRO-LTESPYPOINT
BASIC CONFIGURATION
Use the SPYPOINT app to congure your camera.
CELLULAR CONFIGURATION
MODE
Photos only
Allows you to start the device in Photo mode. The Video mode and the Time-lapse mode are not oered
for this camera model.
DELAY
Instant; 10 seconds; 1 minute;
3 minutes; 5 minutes; 10 minutes;
15 minutes; 30 minutes
Allows you to choose the period of time to wait before the camera detects again and records the next picture.
A longer delay minimizes the number of photos taken and therefore maximizes battery life. A shorter delay
maximizes surveillance in the area but consumes more power. Shorter delays are recommended when the camera
is used for security purposes.
MULTI-SHOT
1; 2
Allows you to take 2 consecutive photos at each detection, with a 5-second delay between each photo.
SENSIBILITY
Low; medium; high
Allows you to choose the detection sensitivity of the device. A higher sensitivity allows you to detect movement
in front of the camera more eectively, so the camera will take more pictures.
CAMERA NAME
All possible values
Allows you to name the camera for easy identication. This function is very useful for users with more
than one camera.
FIRST TRANSFER TIME
All possible combinations
Allows you to choose the time when the camera makes its rst transfer of the day.
Note: the camera transfers are congured by default with 4-hour intervals, determined from the time you
activated your camera. For example, if your camera was activated at 1:42 p.m., the next transfer will be at 5:42 p.m.
TRANSFER FREQUENCY
1; 2; 6; 12; each detection
Allows you to choose the number of transfers the device performs each day.
TAKE A PHOTO AT THE NEXT TRANSFER
Activated/not activated
During the next transfer, the camera will automatically take a picture and communicate it to your application.
Configuration