5
LINK-MICRO-LTESPYPOINT
ANTENNA
Captures the cellular signal.
DETECTION LENS
Enlarges the detection area of the camera’s motion sensor.
MICROSD CARD SLOT
Space to insert the microSD card (not included)
needed to save photos.
LIGHT SENSOR
Detects the ambient lighting conditions for taking pictures:
in colors during the day, black and white at night.
DELAY LIGHT
During installation, once the signal is found, this light ashes for 30
seconds to allow the user to walk away without being photographed.
PHOTO LENS
Image sensor.
LED
4 powerful LEDs that illuminate at night for clear
black and white photos.
OFF/ON SWITCH
Allows the user to turn the camera OFF/ON.
STATUS LIGHT
During installation, it ashes to indicate to the user the strength of the
cellular signal. During regular operation, it indicates that the camera is
recording or transferring les.
SIM CARD SLOT
Space to insert a SIM card. It is necessary to activate cellular functions.
The SIM card, pre-installed and pre-activated, is included with the camera.
It is important to use a SPYPOINT SIM card (supplied by SPYPOINT),
otherwise the cellular functions of the camera will be inoperative.
BATTERY COMPARTMENT
Space to insert the 8 AA batteries
(not included with the camera).
DOOR
Provides access to the battery compartment,
microSD card, STATUS light, and OFF/ON switch.
SLOT FOR INSTALLATION STRAP
Allows the camera to be installed using
the included installation strap.
LOCKING LATCH
Allows you to lock and open the door.
CABLE LOCK HOLE
Allows you to install a #CLM-6FT padlock cable
to secure the unit (sold separately).
ANTENNA SUPPORT
Secures the antenna in a downward position
to protect it when transporting the camera.
ANTENNA HOLDER
Secures the antenna in place to prevent it
from moving.
BATTERY HOLDER
Removable device in which the 8 AA batteries
are inserted.
12 V JACK
Allows you to insert a power cord connected
to an external 12 V source.
SCREWTHREAD FOR STANDARD
¼"20 TRIPOD MOUNT
Allows you to attach a standard tripod from ¼"-20.
Components