Spypoint mini-LIVE - Page 11

11
Settings
Mini

WIRELESS SETTINGS
Sets the wireless options of the camera.
Cellular:
(On/Off)
Activate this option to send photos by cellular transmission.
Country:
(mini-LIVE, mini-LIVE 4G)
The country where the camera is used must be selected.
Provider:
(mini-LIVE, mini-LIVE 4G)
The provider selected must correspond with the SIM card used in the
camera.
Transmission mode: (mini-LIVE only)
(mySPYPOINT/MMS/Email)
Allows the user to choose the means of transmitting photos.
MySPYPOINT mode
The camera communicates with the mySPYPOINT server to update its
status or to send photos to the user's account.
MySPYPOINT subscription is required. Activation procedure available
at spypoint.com/activation.
MMS mode
The camera communicates by MMS to update its status or to send
photos. When the MMS mode is selected, up to 5 different phone numbers
can be entered. The MMS will be sent to these phone numbers. One MMS
is charged for each recipient (accordingly to the rates of the plan used).
To add or modify a number:
- Select the desired line and press OK.
- Use the arrows to select the numbers on the electronic
keyboard and press OK to select a number. The country
code and area code must be entered, digits only (no spaces
or special characters).
- To complete, select OK on the keyboard and press OK.
An MMS plan is required, available from a compatible cellular service
provider. Activation procedure available at spypoint.com/activation.
Email mode
The camera communicates by email to update its status or to send
photos. When the Email mode is selected, up to 5 different email
adresses can be entered. Notications will be sent to these email adresses.
To add or modify an email address:
- Select the desired line and press OK.
- Use the arrows to select the letters, number and special
characters on the electronic keyboard and press OK to select
a character.
- To complete, select OK on the keyboard and press OK.
A data plan is required, available from a cellular service provider.
Activation procedure available at spypoint.com/activation.
Frequency:
(1/day, 2/day, 6/day, 12/day, Each detection, Every 10 min)
Allows the user to choose the number of synchronizations that the came-
ra performs in a day.
"Each detection" or "Every 10 min": it is recommended to use an
external 12-volt input with this camera conguration.