Spypoint mini-LIVE - Page 12

12
Settings
Mini
First sync time:
Allows the user to choose at what time of the day the camera communicates
for the rst time.
E.g.: If the "Frequency" option is set to 6/day and "First synch time" at
04:00, the camera performs 6 synchronizations per day and rst starts
sending at 4 h, 8 h, 12 h, 16 h, 20 h and 24 h.
Photo size:
(Large/thumbnails)
Allows the user to choose the size of the photos sent.
Large: 640X480 (mySPYPOINT/MMS/EMAILS)
Thumbnails: 160X120 (mySPYPOINT)
Note: For MMS and Email modes, photos are always sent in large format.
Theft alert
(mini-LIVE, mini-LIVE 4G, mini-LIVE-4GV)
(On/Off)
Enabling this option allows the camera, in case of theft, to switch into
an alert state and to begin sending pictures on the mySPYPOINT user's
account (subscription required) starting with the most recent ones.
Note: The most recent photo taken by the camera is sent in LARGE
format. The format of the other photos sent is determined by the "photo
size" setting (either thumbnail or large, see p.12). Also, the user receives
an alert message to his email address or by an SMS message to his
cellphone (fees may apply for SMS messages) giving information about
when the camera was moved for the last time. The conguration of this
option can be made on the mySPYPOINT user's account, under "conguration".
Another option is available on the mySPYPOINT website in case of theft
(mini-LIVE-4G/mini-LIVE-4GV). The "Stolen camera" option can be enabled
via the mySPYPOINT website. When enabled, this option locks the camera
so it cannot be used and it starts sending GPS coordinates. It is possible
to access these coordinates via the mySPYPOINT user's account under
"Status" where a map shows the last camera location.
GPS (mini-LIVE-4G/mini-LIVE-4GV)
(On/Off)
During a synchronization, this option allows the camera to send GPS
coordinates to the mySPYPOINT user's account to locate the camera. New
GPS coordinates can also be sent by the camera in case of theft (see
option "Theft alert" in the settings menu).
GPS Test
(Mini-LIVE-4G/4GV only)
Allows the user to test the GPS signal and to know the following informa-
tion: latitude, longitude and satellites.
Provisioning
(Mini-LIVE-4GV / Mini-LIVE-CV only)
Allows the camera to collect the necessary information for cellular network
communication.

GENERAL SETTINGS
Sets the general options of the camera.
Language:
(English/Français/Deutsch/Italiano/Español/Norsk/Svenska/Dansk/
Čeština/Polska/Magyarország)
Allows the user to select a language for the camera menus.
Sensitivity:
(Low/Medium/High)
Allows the user to choose the detection sensitivity of the camera. A higher
sensitivity allows the user to take more photos.
The camera will only detect sources of heat in movement. Make sure to
have the least possible objects in front of the camera during the positioning.
This prevents the camera of taking photos when oriented towards the sun
while an object moves in front of the camera (e.g. a branch).