SRAM G2 ULTIMATE - Lever Service; Parts and Tools Needed for Service

19Lever Service
Lever Service
Parts and Tools Needed for Service
Parts
• Disc Brake Lever Internals/Service Kit - (Includes Piston Assembly,
Bladder & Spring) - G2 RSC/Ultimate
Safety and Protection Supplies
• Safety glasses
• Nitrile gloves
• Oil pan
• Clean, lint-free shop towel
Lubricants and Fluids
• Isopropyl alcohol
• Loctite Threadlocker Blue 242
• SRAM High-Performance DOT 5.1 brake fluid. If SRAM fluid is not
available, only use DOT 5.1 or 4 brake fluid.
• SRAM or AVID DOT grease. If SRAM or AVID DOT grease is not
available only use a DOT compatible grease.
Common Tools
• Needle nose pliers
• Pick with a 90 degree bent tip
• T8, T10, & T25 TORX wrench
• T8 & T10 TORX bit socket
• 8 mm flare nut crowfoot wrench
• 2, 2.5, & 4 mm hex wrenches
• 6 mm socket
• Torque wrench
SRAM Tools
• Lever Internals Assembly Tool - G2 RSC/Ultimate
(included in Lever Internals Service Kit)
• Lever Pivot Bearing Press Tool- for bearing replacement
• SRAM Hydraulic Hose Cutter