SRAM G2 ULTIMATE User Manual

8Troubleshooting
Squeeze the brake lever to advance the pistons until they contact the
rotors.
Remove the rotors.
Use a plastic tire lever to carefully press the pistons back into the
caliper.
Repeat steps 4-6 one more time.
With the pistons pressed back into the caliper, install the brake pads,
h-spring, pad retention bolt, and E-clip.
Install the wheel.
5
6 6
7
8

SRAM G2 ULTIMATE Specifications

General

Type	Hydraulic Disc Brake
Caliper Design	4-piston
Adjustment	Tool-free Reach Adjust, Contact Point Adjustment
Fluid	DOT 5.1
Caliper Material	Forged Aluminum
Rotor Compatibility	200mm, 180mm, 160mm
Intended Use	Trail
Brake Pads	Organic