SSANGYONG OM600 User Manual

1B3-88 OM600 ENGINE MECHANICAL
Removal & Installation Procedure
1. Remove the bearing cab bolt.
2. Remove the bearing caps (8).
Notice
The crankshaft bearing caps are marked with stamped
numbers. Remove the bearing cap from the vibration
damper side.
3. Remove the crankshaft bearing caps (9) and lower thrust
bearings (7).
4. Remove the lower thrust bearings (6) from the bearing cap
(9).
5. Remove the crankshaft (5).
6. Remove the upper thrust bearings(4).
7. Remove the upper bearing shells (3) from crankcase.

SSANGYONG OM600 Specifications

General

Brand	SSANGYONG
Model	OM600
Category	Engine
Language	English