SSZN SR6070 - Page 25

Shenzhen Sincevision Technology Co.Ltd
www.cnsszn.com
25
/
43
Quick Start Guide of SR Series ©2021 SSZN All Right Reserved
Table 8- 2 SR6000 Series System Parameters
Parameter
SR6000 Series 3D Camera
Model
SR6030
SR6070
SR6071
SR6130
SR6260
Reference Distance(CD)
30mm
70mm
70mm
130mm
260mm
Z axis Height(F.S.)
10mm
27mm
71mm
140mm
290mm
X axis Width
14.5mm
32mm
66mm
110 mm
210mm
Light Source Wavelength
405nm
405nm
405nm
405nm
405mm
Laser Class
2M
2M
2M
2M
2M
Laser Output Power
10mW
10mW
10mW
10mW
10mW
Linearity of
Z axis Height
±0.05% of F.S.
±0.05% of F.S.
±0.05% of F.S.
±0.05% of F.S.
±0.05% of F.S.
Repeatability of
Z axis Height
0.5um
0.8um
2um
5um
10um
Repeatability of
X axis Height
2.5um
5um
10um
18um
30um
Profile Data Interval of
X axis Height
10um
20um
50um
80um
150um
Profile Pixel Number of
X axis Height
1600
1600
1600
1600
1600
Sampling Frequency (Hz)
(Trigger Frequency)
460~2500
I/O Terminal
8 x Programmable Inputs, 8 x Programmable Outputs
Encoder Input
NPN/PNP open collector output, differential line driver output are all supported.
Communication Interface
1 x RS-232, 1 x 100Base-TX/1000Base-T
Operation Ambient
Temperature
0～50
o
C
Storage Temperature
-20～70
o
C
Operation Ambient
Humidity
35%～85% RH (No condensation)
ESD Protection
Contact Discharge: 4kV, Air Discharge: 8kV,
Conforming with the IEC61000-4-2 Standard
EFT Protection
Power supply port: 2kV/5kHz or 2kV/100kHz, Signal port: 1kV/5kHz or 1kV/100kHz,
Conforming with the IEC61000-4-4 Standard
Impact Resistance
15Gs/6ms; Conforming with the IEC 68-2-27 Ea Standard
Vibration Resistance
10 to 100 Hz double amplitude 1.5 mm; 3 hours in X, Y and Z directions;
Conforming with the IEC 68-2-6 Fc Standard
Protection Structure
IP67, Conforming with the IEC60529 Standard
Dimension (mm)
78.5x76x45.4
95.5x82.2x45.4
95.5x82.2x45.4
95.5x82.2x45.4
132.5x82.2x45.4
Mass (g)
400
550
550
550
580
Camera cable specification
SCB-HCAM-HB1-3m
、
SCB-HCAM-HB1-10m