ST NUCLEO-F746ZG - Extension Connectors; Figure 11. NUCLEO-F207 ZG, NUCLEO-F429 ZI, NUCLEO-F439 ZI, NUCLEO-F746 ZG, NUCLEO-F756 ZG, NUCLEO-F767 ZI and NUCLEO-H743 ZI

DocID028599 Rev 7 33/82
UM1974 Hardware layout and configuration
81
6.13 Extension connectors
For each STM32 Nucleo-144 board the following figures show the signals connected by
default to the ST Zio connectors (CN7, CN8, CN9, CN10), including the support for Arduino
Uno V3.
Figure 11. NUCLEO-F207ZG, NUCLEO-F429ZI, NUCLEO-F439ZI, NUCLEO-F746ZG,
NUCLEO-F756ZG, NUCLEO-F767ZI and NUCLEO-H743ZI
18&/(2)=*
18&/(2)=,
18&/(2)=*
18&/(2)=,
18&/(2)=*
18&/(2)=,
18&/(2+=,
All manuals and user guides at all-guides.com