ST STM32 Nucleo-32 - Hardware Layout and Configuration

Hardware layout and configuration UM1956
10/37 UM1956 Rev 5
6 Hardware layout and configuration
The STM32 Nucleo-32 board is based on a 32-pin STM32 microcontroller in LQFP or
UFQFPN package.
Figure 2 illustrates the c
onnections between the STM32 and its peripherals (ST-LINK/V2-1,
push-button, LED, and Arduino Nano connectors).
Figure 3: STM32 Nucleo-32 board top layout and
Figure 4: STM32 Nucleo-32 board bottom
layout sh
ow the location of these connections on the STM32 Nucleo-32 board.
Figure 2.
06Y9
(PEHGGHG
67/,1.9
670
0LFURFRQWUROOHU
5(6(7
0LFUR
86%
,2
,2
%
567
$UGXLQR1DQR
FRQQHFWRU
/('
/'
$UGXLQR1DQR
FRQQHFWRU
Hardware block diagram