UM1956 Rev 5 7/37
UM1956 Product marking
36
2 Product marking
Evaluation tools marked as "ES" or "E" are not yet qualified and therefore they are not ready
to be used as reference design or in production. Any consequences arising from such usage
will not be at STMicroelectronics’ charge. In no event, will STMicroelectronics be liable for
any customer usage of these engineering sample tools as reference design or in production.
"E" or "ES" marking examples of location:
• On the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
re
fer to the section Package information of the STM32 datasheet at www.st.com).
• Next to the evaluation tool ordering part number, that is stuck or silk-screen printed on
the bo
ard.
Some boards feature a specific STM32 device version, which allows
the operation of any
bundled commercial stack/library available. This STM32 device shows a "U" marking option
at the end of the standard part number and is not available for sales.
In order to use the same commercial stack in his ap
plication, a developer may need to
purchase a part number specific to this stack/library. The price of those part numbers
includes the stack/library royalties.
3 Ordering information
To order the STM32 Nucleo-32 board, refer to Table 1.
Table 1. Ordering information
Order code Reference board Target STM32
NUCLEO-F031K6
(1)
1. Arm
®
Mbed Enabled™.
MB1180
STM32F031K6T6
NUCLEO-F042K6
(1)
STM32F042K6T6
NUCLEO-F301K8 STM32F301K8T6
NUCLEO-F303K8
(1)
STM32F303K8T6
NUCLEO-L011K4
(1)
STM32L011K4T6
NUCLEO-L031K6
(1)
STM32L031K6T6
NUCLEO-L412KB STM32L412KBU6U
(2)
2. Refer to Chapter 2: Product marking for details.
NUCLEO-L432KC
(1)
STM32L432KCU6U
(2)
To Next Page
Loading...
Need help?
General
