To Next Page

To Previous Page

Features UM1956

6/37 UM1956 Rev 5

1 Features

• STM32 microcontrollers in 32-pin packages

• Three LEDs:

– USB communication LED (LD1)

– Power LED (LD2)

– User LED (LD3)

• Reset push-button

• Board expansion connector:

– Arduino™ Nano

• Flexible board power supply options:

– ST-LINK USB V

BUS

– External sources

• On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability:

mass storage, Virtual COM port and debug port

• Support of a wide choice of Integrated Development Environments (IDEs) including

IAR™ EWARM

(a)

, Keil

MDK-ARM

(a)

, GCC-based IDEs, Arm

Mbed™

(b), (c)

• Arm

Mbed Enabled™ compliant (only for some Nucleo part numbers)

a. On Windows

only.

b. Arm and Mbed are registered trademarks or trademarks of Arm Limited (or its subsidiaries) in the US and or

elsewhere.

c. Refer to the https://www.mbed.com website and to Table 1: Ordering information, to determine which Nucleo

board order codes are supported.

Questions and Answers:

Need help?

Do you have a question about the ST STM32 Nucleo-32 and is the answer not in the manual?

ST STM32 Nucleo-32 Specifications

General