ST STM32F401 Discovery - MDK-ARM Toolchain; Figure 7. IAR Go Button; Figure 8. Uvision4 IDE; Figure 9. MDK-ARM Project Successfully Compiled

DocID025194 Rev 1 11/19
UM1671 Executing and debugging firmware using a software toolchain
18
Figure 7. IAR Go button
2.2 MDK-ARM toolchain
1. Open the Keil MDK-ARM Microcontroller Kit.
Figure 8 shows the basic names of the Keil uVision4 windows referred to in this document.
Figure 8. uVision4 IDE
2. In the Project menu, select Open Project... Browse to select either an example or
demonstration or template project file, and click Open to launch it in the Project
window.
3. In the Project menu, select Rebuild All target files to compile your project.
4. If your project is successfully compiled, the window shown in Figure 9 is displayed.
Figure 9. MDK-ARM project successfully compiled