ST STM32H753I-EVAL User Manual

Ordering information UM2199
8/69 DocID030512 Rev 1
6 Ordering information
To order the STM32H753I-EVAL Evaluation board, refer to Table 1:
7 Delivery recommendations
Some verifications are needed before using the Evaluation board for the first time, to make
sure that no damage occurred during shipment and that no components are unplugged or
lost.
When the board is extracted from its plastic bag, check that no component remains in the
bag. The main component to verify is the microSD card that may have been ejected from
the connector CN13 (right side of the board).
Caution: There is an explosion risk if the battery is replaced by an incorrect one. Make sure to
dispose of used batteries according to the instructions.
Table 1. Ordering information
Order code Target STM32
STM32H753I-EVAL STM32H753XI
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

ST STM32H753I-EVAL Specifications

General

Brand	ST
Model	STM32H753I-EVAL
Category	Motherboard
Language	English