ST STM32H757 User Manual

PM0214 Rev 10 135/262
PM0214 The STM32 Cortex-M4 instruction set
261
3.8.1 PKHBT and PKHTB
Pack Halfword
Syntax
op{cond} {Rd}, Rn, Rm {, LSL #imm}
op{cond} {Rd}, Rn, Rm {, ASR #imm}
Where:
• op’ is one of:
PKHBT Pack Halfword, bottom and top with shift.
PKHTB Pack Halfword, top and bottom with shift.
• ‘cond’ is an optional condition code (see Conditional execution on page 65)
• ‘Rd’ is the destination register.
• ‘Rn’ is the first operand register.
• ‘Rm’ is the second operand register holding the value to be optionally shifted.
• ‘imm’ is the shift length. The type of shift length depends on the instruction:
For PKHBT: LSL: a left shift with a shift length from 1 to 31, 0 means no shift.
For PKHTB: ASR: an arithmetic shift right with a shift length from 1 to 32,a shift of 32-
bits is encoded as 0b00000.
Operation
The PKHBT instruction:
1. Writes the value of the bottom halfword of the first operand to the bottom halfword of
the destination register.
2. If shifted, the shifted value of the second operand is written to the top halfword of the
destination register.
The PKHTB instruction:
1. Writes the value of the top halfword of the first operand to the top halfword of the
destination register.
2. If shifted, the shifted value of the second operand is written to the bottom halfword of
the destination register.
Restrictions
Rd must not be SP and must not be PC.
Condition flags
This instruction does not change the flags.
Examples
PKHBT R3, R4, R5 LSL #0 ; Writes bottom halfword of R4 to bottom halfword
; of R3, writes top halfword of R5, unshifted, to top
; halfword of R3
PKHTB R4, R0, R2 ASR #1 ; Writes R2 shifted right by 1 bit to bottom half
; word of R4, and writes top halfword of R0 to top
; halfword of R4.

ST STM32H757 Specifications

General

Brand	ST
Model	STM32H757
Category	Computer Hardware
Language	English