PM0214 Rev 10 157/262
PM0214 The STM32 Cortex-M4 instruction set
261
3.10.7 VDIV
Divides floating-point values.
Syntax
VDIV{cond}.F32 {Sd,} Sn, Sm
Where:
• ‘cond’ is an optional condition code, see Conditional execution on page 65.
• ‘Sd’ is the destination register
• ‘Sn, Sm’ are the operand registers.
Operation
This instruction:
1. Divides one floating-point value by another floating-point value.
2. Writes the result to the floating-point destination register.
Restrictions
There are no restrictions.
Condition flags
These instructions do not change the flags.
To Next Page
Loading...
Need help?
General
