To Next PageTo Next Page
Need help?Do you have a question about the ST STM32L5 Nucleo-144 board and is the answer not in the manual?
General| Brand | ST |
|---|---|
| Model | STM32L5 Nucleo-144 board |
| Category | Motherboard |
| Language | English |
Explains markings on evaluation tools and the STM32 device, including 'ES' or 'E'.
Explains the meaning of the product codification based on MCU series, memory, and package.
Specifies the operating systems and hardware required for development toolchains.
Lists supported software development tools like IAR, Keil, and STM32CubeIDE.
Describes the preloaded demonstration software and its availability for download.
Step-by-step guide to configure the board and launch the demonstration application.
Details the default jumper settings and voltage configurations for the Nucleo board.
Top layout of the STM32L5 Nucleo-144 board, identifying key connectors and components.
Provides mechanical dimensions of the STM32L5 Nucleo-144 board in millimeters.
Information about the required USB drivers for ST-LINK/V2-1 and installation.
Guidance on how to update the firmware for the onboard ST-LINK/V2-1 debugger.
Configuration of ST-LINK/V2-1 using jumpers for on-board or external debugging.
Details the various DC power sources that can be used to power the Nucleo board.
Procedure for external powering for programming/debugging without ST-LINK.
Describes the availability of 5V and 3V3 outputs for powering external devices.
Details the board's internal power supply configurations, including 3V3 and 1V8.
Configuration options for the Low-Speed External (LSE) 32.768 kHz clock.
Configuration options for the High-Speed External (HSE) clock.
Specific limitations related to the RSS and bootloader functionality on the STM32L5.
Describes how the Nucleo-144 board functions as a USB device via the Type-C™ connector.
Explains the USB Power Delivery (UCPD) feature, including dead battery and SINK mode.
Information on ARDUINO® Uno V3 compatible Zio connectors (CN7-CN10) and their pinouts.
Specific limitations related to the RSS and bootloader functionality on the STM32L5.
Limitations concerning the internal SMPS functionality on the STM32L5.
FCC compliance information including Part 15 rules and user guidance.
Industry Canada compliance statement and relevant label information.
CE conformity warning regarding Class B compliance and potential radio interference.
