What to do if the Standard Diagnostics urometer 120 Medical Equipment displays 'ERR Load Over Cnt'?
This error appears if the strip loading plate is incorrectly inserted or not working correctly during the internal calibration when you turn on the power. To resolve this, turn the machine off and restart it. If the error persists, contact your local technical service.
Why does my Standard Diagnostics urometer 120 say 'Misplaced strip'?
The 'Misplaced strip' error indicates that the sensor isn't detecting the test strip, or the strip is not correctly positioned on the sensor. The suggested solution is to repeat the measurement using a new strip.
Describes the analyzer's purpose for urine chemistry analysis with specific parameters.
Details technical specs like voltage, size, weight, capacity, interface, and environmental conditions.
Outlines safety guidelines and precautions for using the UroMeter 120, covering usage, handling, and sample safety.
Explains how to connect the UroMeter 120 to a PC using RS232c or USB cables.
Describes the process of turning on the analyzer and its initial standby mode.
Guides users through configuring settings like beep, baud rate, display units, strip type, language, and printer options.
Details measurement procedures in Quick/Normal modes, strip handling, result display times, and precautions.
Provides causes and actions for specific error messages like 'Misplaced strip' and 'ERR Load Over Cnt'.
General| Category | Medical Equipment |
|---|---|
| Measurement Parameters | Urine Volume |
| Sample Type | Urine |
| Type | Urometer |
| Display | Graduated Scale |
| Product Name | Standard Diagnostics urometer 120 |
To Next Page