18
5. Specific Operation Manual
3) Be sure to use fresh urine sample.
4) You must lay one strip on the strip loading plate at a time.
5) As with all diagnostic tests, all results must be considered with
other clinical information available to the physician.
6) In Quick Mode, consider reaction time at least 1 minutes
7) Excessive urine probably cause malfunction.
ⓐⓒ [Fig 5.8] Measuring Mode ⓑ
- ⓐ Time of measurement
- ⓑStrip type
- ⓒ Sample’s number tested and Data’s number saved in data base
▲
▼
▼
To Next Page
Loading...