Stanley Pro MC521 User Manual

MC521 PRO Control Box
26 Document # 204066 REV D2 • www.stanleyaccesstechnologies.com • 1.800.7.ACCESS
Copyright 2015, Stanley Security Solutions. All rights reserved. Reproduction in whole
or in part without the express written permission of Stanley is prohibited.
10.21.2015
Attachment 6
Handheld Device Troubleshooting Screen Descriptions
(Sheet 1 of 1)
TB1-8 Swing = Bodyguard Data Line Output or Lock Output
Slide = Solenoid Lock Output
TB2-1 Swing/Slide = Hold Open Funcon Switch Input
TB2-3 Swing/Slide = Automac Funcon Switch Input
TB2-5 Slide = Enter/One Way Switch Input
TB2-7 Slide = Reduced Open Switch Input
TB2-9 Slide = Reduced Open/One Way Single Pole Rotary Input
TB3-4 Swing = Stall Input
Slide/Bifold = Stanguard Input/Output
TB3-8 Swing = Safety Input
Slide = Holding Beam Input
TB3-9 Swing/Slide = Breakout Input
TB4-4 Swing = Operate Sensor Input
Slide = Inside Sensor Input
TB4-8 Swing = Safety Input
Slide = Outside Sensor Input
TB4-9 Swing/Slide = Push Plate Input
TB5-3 Swing = Sentrex Operate Sensor Input (Internal, From MicroBoard)
Slide = Side Screen Sensor Input
TB5-7 Swing = Holding Beam Input
Slide = Closed-Door Posion Switch Input
TB5-10 Spare Output
TB6-1 Slide = Photo Beam Pro Upper Holding Beam
TB6-3 Slide = Photo Beam Pro Lower Holding Beam
TB6-5 Slide = Photo Beam Pro Test Output

Stanley Pro MC521 Specifications

General

Brand	Stanley
Model	Pro MC521
Category	Controller
Language	English