Stanley Pro MC521 User Manual

MC521 PRO Control Box
10.21.2015
1.800.7.ACCESS • www.stanleyaccesstechnologies.com • Document # 204066 REV D2 3
Copyright 2015, Stanley Security Solutions. All rights reserved. Reproduction in whole
or in part without the express written permission of Stanley is prohibited.
Prerequisites
Special Items Required:
• Stanley Access Technologies document No. 203975, “Stan Vision Installaon and Operaon” (if installed).
• Stanley Access Technologies document No. 203957, “SU-100 Moon Sensor Installaon and Operaon” (if installed).
• SU-100 tune-in remote control (if SU-100 Moon Sensor is installed).
• Stanley Access Technologies document No. 203768, “Stanguard
TM
Threshold Sensor Installaon and Operaon”
(if installed).
• Optex OA-203C manufacturer’s installaon and tune-in instrucons (if installed).
• Compable handheld device; visit hp://www.stanleyaccesstechnologies.com/index.asp?Mode=DOWNLOADS
for a current list of compable devices.
• Bluetooth adapter or cable to connect compable handheld device to MC521 Pro Controller.
• Degreaser.
• Instrucons for any other device to be wired into the MC521 Pro Controller.
Precautions
All ANSI/BHMA and UL Requirements in Attachment 4 must be met before the door is put into operation.
INSTALLATION INSTRUCTIONS
Installing the MC521 Pro Controller
NOTE: This manual covers new door installaons in which the MC521 Pro is factory-installed and wired.
WIRING INSTRUCTIONS
Evaluating Power Requirements
• ENSURE power source is a dedicated 115 VAC, 50/60 Hz source with 20A circuit rang. If four operators are
used, the source should have a 30A rang.
• ENSURE no more than four operators will be connected to one circuit.
• ENSURE power source is not shared with other equipment, i.e., cash registers, EAS systems, or other electro-
magnec interference generators.
2
3

Stanley Pro MC521 Specifications

General

Brand	Stanley
Model	Pro MC521
Category	Controller
Language	English