MC521 PRO Control Box
12 Document # 204066 REV D2 • www.stanleyaccesstechnologies.com • 1.800.7.ACCESS
Copyright 2015, Stanley Security Solutions. All rights reserved. Reproduction in whole
or in part without the express written permission of Stanley is prohibited.
10.21.2015
Final Tune-In Adjustments
1. Refer to ANSI A156.10, “American Naonal Standard for Power Operated Doors,” and aachment 4
and DETERMINE ANSI and UL door operang requirements.
2. IF Stanguard threshold sensor is installed, refer to Stanley Access Technologies document No.
203768, “Stanguard
TM
Threshold Sensor Installaon and Operaon,” and TUNE-IN Stanguard
threshold sensor.
3. IF SU-100 moon sensor(s) are installed, refer to Stanley Access Technologies document No. 203957,
“SU-100 Moon Sensor Installaon and Operaon,” and TUNE-IN SU-100 moon sensor(s).
4. IF OA-203C presence sensor(s) are installed, refer to manufacturer’s instrucons and TUNE-IN OA-203C
presence sensor(s).
5. To ensure that all sengs have been stored in EEPROM memory, turn power OFF and then back ON.
Repeat step 1 above.