To Next Page

To Previous Page

 Do not open the printer covers while the printer is printing or cutting.

 Do not pull out paper when the printer cover is closed.

 Ifliquidorforeignobjects(suchascoinsandpaper)entertheinsideoftheprinter,turnthepowerswitchoff,disconnect

the power cord from the AC outlet, and consult the dealer that you bought the product from.

Continuingtousetheprintermayleadtoashort-circuit,whichmaycauseelectricshockorre.

 The heating element and the driver IC of the thermal print head are easily damaged. Do not touch them with metal objects,

sandpaper, etc.

 Do not touch the thermal print head heating element. Doing so may make it dirty, which will decrease the printing quality.

 Static electricity can damage the driver IC and other components of the thermal print head. Avoid touching it directly.

 Donotoperatetheprinterifthereismoisture(whichhasbeencausedbycondensationoranotherfactor)onthefrontsur-

face of the head.

 The printing quality and the thermal print head’s service life cannot be guaranteed if paper other than the recommended

paper is used.

In particular, thermal paper containing Na+, K+, or C1- may drastically reduce the service life of the thermal print head.

Werecommendthatyouusepaperwiththefollowingmaximumiondensities:500ppmofNa+,150ppmofK+,and300

ppm of Cl-.

For details on recommended thermal paper, see the following webpage.

http://www.starmicronics.com/support/

Star Micronics BSC10 Series User Manual

Questions and Answers: