Star Micronics NX-1000 series - Chapter 3: Adjustments

CHAPTER 3
ADJUSTMENTS
This printer has undergone various adjustments so that it will achieve standard performance. In this chapter,
a brief explanation is given of the methods of adjustments.
Please check this explanation when making maintenance inspections or when replacing parts to correct
malfunctions.
1. Gap Adjustment Between Print Head and Platen ............................................ 31
1-1. Measuring Gap Between Print Head and Platen.................................................31
1-2. Adjusting Gap Between Print Head and Platen .................................................. 31
2. Adjustment of Timing Belt Tension................................................................... 32
3. Adjustment of Home Position (Colour Type only) ........................................... 33
3-1. Measuring Gap Between Home Position Detector and Frame ..........................33
3-2. Adjusting Gap Between Home Position Detector and Frame ...........................33
4. Adjustment of Colour Ribbon Holder (Colour Type only)............................... 34
1
2
3
4
5
6
7
8
A