Star Micronics NX-1000 series - Print Head, Motor, and Other Unit Replacement

PARTS REPLACEMENT
– 41 –
6. Printer Head
(1) Remove
• Printer cover
• Ink ribbon cartridge
• Connector cover [1]
• Gear Cover [2] (Colour type only)
• Two tapping screws [3]
• Head cable [4]
• Print head [5]
WARNING:
The print head becomes hot after printing so wait
for it to cool before removing it.
(2) Adjust
• Gap between print head and platen
Refer to item 1 of Chapter 3.
For Ver. 1 and 1.5
For Ver. 2