– 5 –
GENERAL SPECIFICATIONS
Printing
Dot matrix size
Character matrix 9 × 9 dots (Draft pica)
18 × 23 dots (Courier and Orator pica)
18 × 18 dots (Sanserif pica,elite)
7 × 11 dots (Block graphics,pica)
18 × 19 dots (Courier and Orator elite)
18 × 12 dots (Condensed pica)
18 × 10 dots (Condensed elite)
Bit-image graphic 7 × 480 dots at 60 dpi (Single density)
8 × 480 dots at 60 dpi (Single density)
7 × 960 dots at 120 dpi (Double density)
8 × 960 dots at 120 dpi (Double density)
8 × 960 dots at 120 dpi (High speed)
8 × 1920 dots at 240 dpi (Quadruple density)
Line spacing 1/6 inch standard 1/8, n/72, or n/216 inch programmable
Column width 80, normal pica 96, normal elite
137, condensed pica 160, condensed elite
Paper
Single sheets 5.5 ~8.5 inches wide 0.07 ~ 0.10 mm thick
Fanfold paper 4 ~ 10 inches wide 0.07 ~ 0.10 mm thick (single-ply)
Max. 0.28mm thick (3 ply)
Printer
Dimensions Height 108 mm (4.3 inches) Width 384 mm (15.1 inches)
Depth 287.5 mm (11.3 inches)
Weight 4.7 kg (10.3 pounds)
Power 120 VAC±10%, 60Hz. 220 VAC±10%, 50/60Hz.
240 VAC±10%, 50/60Hz.
Power consumption Typ. 30W, Max. 60W
Environment Operating temperature: 5 to 40°C (41 to 104°F)
Operating humidity: 10 to 80%, no condensation
Storage temperature: –30 to 65°C (–22 to 149°F)
Storage humidity: 10% to 95% (at 40°C) (no condensation)
Print head 9 Pins
Life: 200 million dots
Ribbon Fabric ribbon cartridge
Monochrome type ........................... Black
Colour type ..................................... Black/blue/red/yellow
Life: 1 million draft characters
Option Automatic sheet feeder
Commodore interface
Interface Serial mode, for Commodore computers
Synchronization By external supplied clock (synchronous serial)
Logic level TTL
Connector 6-pin DIN
To Next Page
Loading...
Need help?
General
