INTRODUCTION
This manual describes dot matrix printers as shown below.
It is intended for use as a reference for periodic inspections and maintenance procedures.
This manual is prepared for use at a technical level and not for the general user.
Model Destination
NX-1020 RAINBOW For American market
NX-1020 COLOUR For Asian market
LC-200 For European market
LC-200 COLOUR For Pacific market
• This manual is divided into the following sections:
Chapter 1 General Specifications
Chapter 2 Theory of Operation
Chapter 3 Adjustments
Chapter 4 Parts Replacement
Chapter 5 Maintenance and Lubrication
Chapter 6 Troubleshooting
Chapter 7 Parts List
• First edition : Jun. 1990
Second edition : Jan. 1991 Add the new model (NX-1020 COLOUR and LC-200 COLOUR)
Third edition : May 1991 Add the new printer mechanism (Ver. 2)
Fourth edition : Jul. 1993
Fifth edition : Sep. 1995
Sixth edition : Apr. 1996
To Next Page
Loading...
Need help?
General
