– 3 –
GENERAL SPECIFICATIONS
1. General Specifications
Print system Serial Impact Dot-matrix
Printing speed Pica Elite
High-Speed Draft 200cps 225cps
Draft 150cps 180cps
NLQ 37.5cps 45cps
Print direction Bidirectional, logic-seeking
Unidirectional, logic-seeking (selectable)
Print head 9pins
Life: 100 million characters
Line spacing 1/6, 1/8, n/72, n/216 inches
Paper feed Friction and push/pull tractor
Paper feed speed 2.9 inches/second max.
Character set
ASCII 96
International 16 set(*)
IBM special 111
IBM block graphic 50
IBM code page 6 set(**)
Download 255
* USA, France, Germany, England, Denmark I, Sweden, Italy, Spain I, Japan, Norway, Denmark II, Spain II, Latin America, Korea, Irish, Legal
** #437 (USA), #850 (Multi-Lingual), #860 (Portuguese), #861 (Icelandic), #863 (Canadian French), #865 (Nordic)
Number of columns CPI Columns
Pica 10 80
Elite 12 96
Condensed pica 17.1 137
Condensed elite 20 160
Proportional Variable
Character dot matrix 9 × 11 (Draft)
18 × 23 (NLQ)
Bit image dot-matrix DPI
Normal 60 (8 or 9) × 480
Double 120 (8 or 9) × 960
High-speed double* 120 (8 or 9) × 960
Quadruple 240 (8 or 9) × 1920
CRT I 80 (8 or 9) × 640
CRT II 90 (8 or 9) × 720
Plotter 72 (8 or 9) × 576
Double-plotter 144 (8 or 9) × 1152
* It is impossible to print adjacent dots in the modes marked with an asterisk(*).
Paper width
Cut sheet 4” ~ 11.7”
Fanfold (continuous) 4” ~ 10”
Copies Original + 3 copies (Max.)
To Next Page
Loading...
