ā 28 ā
THEORY OF OPERATION
Fig. 2-13 Paper Feed Motor Driving Signals
The utilization of voltage applied to the paper feed motor is described as follows.
Mode Voltage Application
Operation +25VDC Motor Drive
Standby: +5VDC Holding Bias
Voltage to the paper feed motor is changed by setting CPU port P31 to LOW or HIGH and by turning transistors TR4 and
TR5 ON or OFF.
When TR5 is turned on, +25V is applied to the paper feed motor.
When TR5 is turned off, +5V is supplied to the motor via diode D2.
To Next Page
Loading...
