Star Micronics NX-1020 - Page 41

CHAPTER 3
ADJUSTMENTS
This printer has undergone various adjustments so that it will achieve standard performance.
In this chapter, a brief explanation is given of the methods of adjustments.
Follow the instruction when making maintenance inspections or when replacing parts to correct malfunctions.
1. Gap Adjustment Between Print Head and Platen ............................................39
1-1. Measuring Gap Between Print Head and Platen ............................................... 39
1-2. Adjusting Gap Between Print Head and Platen ................................................. 39
2. Adjustment of Timing Belt Tension...................................................................40
1
2
3
4
5
6
7