Star Micronics SP300 Series - Control Codes Used for Graphics Printing

– 41 –
7-4. Control Codes Used for Graphics Printing
FUNCTION
Set 7/72-inch line feed
CODE
<ESC> “1”
(1B)
H (31)H
OUTLINE
Line feed is set at 7/72-inch after this code is received.
FUNCTION
Define n/72-inch line feed
CODE
<ESC> “A” n
(1B)H (41)H n
DEFINITION RANGE
0 n 85 (Default n = 12)
OUTLINE
Line feed is defined at n/72-inch after this code is received.
This code sets the feed at n/72-inch with the <ESC> “2” code.
FUNCTION
Set n/72-inch line feed
CODE
<ESC> “2”
(1B)
H (32)H
OUTLINE
This code sets the line feed at a defined value with the <ESC>
“A” previously described.
FUNCTION
One time line feed of n/72-inch
CODE
<ESC> “J” n
(1B)
H (4A)H n
DEFINITION RANGE
1 n 255
OUTLINE
This code activates the n/72-inch paper feed once.
FUNCTION
Set 1/12-inch line feed
CODE
<ESC> “z” “0” or <ESC> “z” <0>
(1B)
H (7A)H (30)H or (1B)H (7A)H (00)H
OUTLINE
Line feed is set at 1/12-inch after this code is received.