– 47 –
FUNCTION
Enable download character set
CODE
<ESC> “%” “1” or <ESC> “%” <1>
(1B)
H (25)H (31)H or (1B)H (25)H (01)H
OUTLINE
Enables the download character set
Download characters defined by the ESC & 0 code cannot be
printed until enabled by this command.
FUNCTION
Disable download character set
CODE
<ESC> “%” “0” or <ESC> “%” <0>
(1B)
H (25)H (30)H or (1B)H (25)H (00)H
OUTLINE
Disables the selected download character set and selects the
built-in character set. When the power of the printer is
initially turned on, the built-in character set is selected.
EXAMPLE
To print a download character when the 7 × 9 (half dot) font
character size is set.
(1) Design the download character to be used at code posi-
tions (21)
H, (22)H, and (23)H.
(2) Define the download characters.
When character codes where the download character is
written are specified as (21)H, (22)H, (23)H, n1 = (21)H, n2
=(23)
H are obtained.
If the relationship between the character pattern data and
printing head is specified to “not use pin 9”, m0 = (80)
H is
obtained. When data m1 to m7 are converted into hexadeci-
mal data, they are indicated as follows.
m1 m3 m5 m7
D8
D7
D6
D5
D4
D3
D2
D1
m2 m4 m6
m1 m3 m5 m7
D8
D7
D6
D5
D4
D3
D2
D1
m2 m4 m6
m1 m3 m5 m7
D8
D7
D6
D5
D4
D3
D2
D1
m2 m4 m6
Char. Code=(21)H Char. Code=(22)H Char. Code=(23)H
To Next Page
Loading...
