Star Micronics TSP600 Series - 3-4. Turning Power On

– 12 –
LINE MODE
FUNCTION
Sets the printing magnified double in character width.
CODE
<SO>
HEX
0E
REMARKS
Prints the subsequent data including a character spacing set by
<ESC><SP> n, magnified double in character width.
FUNCTION
Resets the printing magnified in character width.
CODE
<DC4>
HEX
14
REMARKS
Resets the printing magnified in character width set by <SO>,
<ESC>“W”n and <ESC>“i”n1n2.
FUNCTION
Sets the magnification rate in character width.
CODE
<ESC> “W” n
HEX
1B 57 n
REMARKS
Prints the subsequent data including a character spacing set by
<ESC><SP> n, magnified in character width by a rate specified by
the value of n.
n Character width n Character width
0 Unmagnify 3 Quadruple
1 Double 4 Quintuple
2 Triple 5 Sextuple
The value of n can be set to 0(00H) to 5(05H) or “0”(30H) to
“5”(35H).
FUNCTION
Sets the printing magnified double in character height.
CODE
<ESC><SO>
HEX
1B 0E
REMARKS
Prints the subsequent data magnified double in character height.
FUNCTION
Resets the printing magnified in character height.
CODE
<ESC><DC4>
HEX
1B 14
REMARKS
Resets the printing magnified in character height set by
<ESC><SO>, <ESC>“h”n and <ESC>“i”n1n2.