– 48 –
PAGE MODE
3-2. Command Specification
Format Definition
FUNCTION
Clear format
CODE
<ESC> “C” <LF><NUL>
HEX
1B 43 0A 00
REMARKS
When the printer receives this command, all defined format and
image data are cleared.
The format defined by the following commands will be cleared.
<ESC> “D”
<ESC> “E” <ESC> “L” <ESC> “PC” <ESC> “PB”
<ESC> “Y” <ESC> “RC” <ESC> “RB” <ESC> “Q”
<ESC> “H” <ESC> “K” <ESC> “B”
FUNCTION
Define print area
CODE
<ESC> “D n1n2n3n4” <LF> <NUL>
HEX
1B 44 n1n2n3n4 0A 00
REMARKS
This command defines the print area(page length) according to the
value of n1n2n3n4 in 1/10 mm unit.
n1n2n3n4 :Print area 0001 to 2000 (0.1 mm to 200 mm)
Note :When a value greater than the size of the label is set,
two or more labels are assumed to be one label.
For example, when 50 mm is set for a label whose
pitch is 40 mm, one print pattern is printed using two
labels.
To avoid such a case, approx. 5 mm of each top and
bottom margins should be considered.
ABCD
EFG
ABCD
EFG
ABCD
EFG
ABCD
EFG
40 mm
50 mm
To Next Page
Loading...
