Star Micronics TSP600 Series - 7. Preventing and Clearing Paper Jams; 7-1. Preventing Paper Jams; 7-2. Removing Paper Jam

– 21 –
LINE MODE
FUNCTION
Absolute position setting
CODE
<ESC> <GS> “A” n1 n2
HEX
1B 1D 41 n1 n2
REMARKS
Sets the absolute position based on the left margin position for
starting the next printing.
0
n1, n2 255
The start of the next printing is the (n1 + n2 × 256 dot) position from
the left margin position.
Settings that exceed the print area are ignored.
FUNCTION
Relative position setting
CODE
<ESC> <GS> “R” n1 n2
HEX
1B 1D 52 n1 n2
REMARKS
Sets the relative position based on the current position for starting
the next printing.
0
n1, n2 255
The start of the next printing is the (n1 + n2 × 256 dot) position from
the current position.
1. Settings that exceed the printing area are ignored.
2. When set in the right direction from the current position with
regard to the character direction, this specifies positive inte-
gers and when set in the left direction, this specifies negative
integers.
3. Negative integers are shown with the compliment 65536.
For example, if moving N pitches in the left direction:
n1 + n2 × 256 = 65536 – N.