– 14 –
LINE MODE
FUNCTION
Upperlining
CODE
<ESC> “_” n
HEX
1B 5F n
REMARKS
When the value of n is 1, overlines the subsequent data including
a character spacing set by <ESC><SP> n.
The part to be skipped by the horizontal tab setting and the block
graphic characters are not upperlined.
Resets the upperline mode when the value of n is 0.
The value of n can be set to 0(00H) or “0”(30H), or 1(01H) or
“1”(31H).
FUNCTION
Select highlight printing
CODE
<ESC> “4”
HEX
1B 34
REMARKS
Prints the subsequent data including a character spacing set by
<ESC><SP> n highlighted.
The part to be skipped by the horizontal tab setting is not high-
lighted.
FUNCTION
Cancel highlight printing
CODE
<ESC> “5”
HEX
1B 35
REMARKS
Cancels highlight printing.
FUNCTION
Inverted printing
CODE
<SI>
HEX
0F
REMARKS
Causes subsequent characters to be inverted.
FUNCTION
Cancel inverted printing
CODE
<DC2>
HEX
12
REMARKS
Cancels inverted printing.
To Next Page
Loading...
