Star Micronics TSP700 Series - Parts Identification and Nomenclature

– 1 –
1. OUTLINE
1-1. TSP700 Series
The details of each command are shown in the following sections.
The printer has two different software modes (STAR Line mode and ESC/POS
mode ) which can be selected using the DIP switch.
(Factory setting: STAR Line mode)
DIP Switch #1
1-1 Mode Selection
ON STAR Line mode
OFF ESC/POS mode
For the detailed functions and settings of the DIP switches, please refer to the
User's Manual.
1-2. TSP800 Series
The details of each command are shown in the following sections.
The printer has three different software modes (STAR Line mode, STAR Pege
mode, DP8340 mode and ESC/POS mode ) which can be selected using the DIP
switch.
(Factory setting: STAR Line mode)
DIP Switch #1
1-1 1-2 Mode Selection
ON ON STAR Line mode
OFF ON STAR Page mode
ON OFF DP8340 mode
For the detailed functions and settings of the DIP switches, please refer to the
User's Manual.