Star Micronics TSP700 Series - Page 44

– 41 –
LINE MODE
0
Constantly
set at 0
Paper empty
1 : empty
Near-end sensor
1: Near-end
Near-end sensor
1: Near-end
Constantly
set at 1
Constantly
set at 0
Constantly
set at 0
Constantly
set at 0
01
b7 b6 b5 b4 b3 b2 b1 b0
FUNCTION
Request Status
CODE
<EOT>
HEX
04
REMARKS
Causes the printer to transmit a status byte.
Status byte
FUNCTION
Request status
CODE
<ESC> <ACK><SOH>
HEX
1B 06 01
REMARKS
Causes the printer to transmit a status byte.
Header #1 (1st byte )
Bit Contents 0 1
0 Always“1” -
1
2 Number of printer status byte
3
4 Always“0” -
5 Number of printer status byte
6 Always“0” -
7 Always“0” -