Star Micronics TSP700 Series - Page 47

– 44 –
LINE MODE
Printer status #4 (6th byte )
Bit Contents 0 1
0 Always“0” -
1 Invalid
2 Near-end Near-end
3 Paper empty Empty
4 Always“0” -
5 Invalid
6 Invalid
7 Always“0”
-
Printer status #5 (7th byte )
Bit Contents 0 1
0 Always“0” -
1 Invalid
2 Invalid
3 Invalid
4 Always“0” -
5 Invalid
6 Invalid
7 Always“0”
-
FUNCTION
Set status transmission condition
CODE
<ESC> <RS> “a” n
HEX
1B 1E 61 n
REMARKS
Status transmission condition is set according to the value of n.
n = 0 : ASB is invalid
n = 1 : ASB is valid
FUNCTION
Reset the printer hardware
CODE
<ESC> “?” <LF><NUL>
HEX
1B 3F 0A 00
REMARKS
Resets the printer hardware.