– 73 –
DP8340 MODE
CODE
FS
(1C)
H
FUNCTION
Trigger peripheral unit drive #1
OUTLINE
Causes a peripheral drive pulse to be generated immediately.
CODE
SUB
(1A)
H
FUNCTION
Trigger peripheral unit drive #2
OUTLINE
Causes a peripheral drive pulse to be generated. The drive
pulse width and delay time are fixed at 200 ms.
CODE
ENQ
(05)
H
FUNCTION
Enquiry
OUTLINE
When this code is received, the printer outputs status data.
If it is input after text data input in the STX-ETX mode, the
printer outputs status data and the check byte.
CODE
CAN
(18)
H
FUNCTION
Clears print buffer
OUTLINE
Upon input of this code the data buffer and line buffer is
cleared.
Executed by BEL code and FS code after printing.
CODE
BEL
(07)
H
FUNCTION
Trigger peripheral unit drive #1
OUTLINE
Causes a peripheral drive pulse to be generated. This code is
normally stored in the buffer and is performed as it is received
from the data queue.
To Next Page
Loading...
