Need help?Do you have a question about the Star TSP700II SERIES and is the answer not in the manual?
General| Print Speed | 250 mm/sec |
|---|---|
| Resolution | 203 dpi |
| Print Method | Direct Thermal |
| Paper Width | 80 mm |
| Connectivity | USB, Ethernet, Serial, Parallel |
| Cutter | Guillotine (Partial Cut) |
Check for necessary accessories after unpacking the unit.
Points to consider when selecting a location for the printer.
Connect the interface cable to the appropriate port on your PC.
Instructions for connecting various interface cables to the printer.
Procedure for installing printer driver and utility software from CD-ROM.
Steps to connect the AC adapter for powering the printer.
Procedure to turn on the printer after setup.
How to connect peripheral units like cash drawers to the printer.
Steps for correctly loading the paper roll into the printer.
Instructions for attaching the holder plate accessory.
Procedure for attaching the cable cover.
Guide for installing the switch blind accessory.
Specifications and recommended types of thermal paper rolls.
Specifications and recommended types of full-face thermal label paper.
Specifications for tack label paper rolls.
Details about the optional AC adapter.
Overview of the printer's control panel, buttons, and LEDs.
Description of recoverable and non-recoverable printer errors and their solutions.
How to perform self-printing and use Hexadecimal Dump Mode.
Guidelines to avoid paper jams.
Step-by-step procedure to clear a paper jam.
Instructions for cleaning the thermal head.
How to clean the rubber roller.
Guide to cleaning sensors and surrounding areas.
Instructions for cleaning the paper holder.
General technical specifications of the printer.
Technical specifications for the auto cutter.
List of supported interfaces.
Electrical input voltage and current consumption details.
Operating and storage temperature and humidity requirements.
Information on MCBF and auto cutter life.
Specifications related to black mark sensing.
DIP switch settings for the parallel interface.
DIP switch settings for the RS-232C serial interface.
DIP switch settings for the USB interface.
DIP switch settings for the Ethernet interface.
DIP switch settings for the Wireless LAN interface.
Asynchronous serial interface, baud rate, and word length details.
Pinout and function of the RS-232C connector.
Recommended interface cable connections.
Electrical characteristics for RS-232C interface.
Specifications for USB interface.
Specifications for Ethernet interface.
Specifications for Wireless LAN interface.
To Next Page