4
Status Pro – T430 User Guide
SAFETY INSTRUCTIONS
1. Safety Instructions
1.1 Class of Laser
The laser light emitted from a Status Pro Laser has an output rating of < 1,0 mW.
The Laser is placed in the category „Class 2“ and is classified as safe for the use as a
measurement instrument. There are however a few safety aspects to be observed:
Caution!
• Do not stare into the laser beam.
• Do not point the laser beam at other people.
• Observe the local safety guidelines on site and if in doubt consult
the site safety engineer.
• Do not use the equipment in damp or moist locations.
• Ensure shading of the equipment against direct sunlight
or heat sources.
• Fluids or rain as well as extreme temperature conditions may
damage the equipment.
Note
Do not violently shake the laser or other sensors and always
protect against falls. This can damage the structure or the optics
of the instrument resulting in false measurements.
Do not touch rotating parts when in use!
To Next Page
Loading...