6
Status Pro – T430 User Guide
1.4 Instrument Care
Your measurement instrument is designed for use in an industrial environment and can
withstand water splashes or light spray as well as dust. Clean the equipment using a soft
cotton cloth and a mild soap solution. Laser apertures as well as sensor areas should only
be cleaned using a soft, dry and dust-free cloth. Do not use paper towels to clean glass
surfaces as they could scratch. Avoid contact with grease, oil or oil-based solutions when
handling the equipment.
1.5 Maintenance
The mechanical components of your equipment are prone to natural wear and tear! If the
instrument appears to have a technical defect, contact the manufacturer.
Do not try to repair or open the sensor casing. Attempted repairs through unauthorized
personnel make the guarantee null and void! Always store the instrument under dry con-
ditions and use the case for transportation.
To ensure trouble-free processing, simply fill in the form you will find using the following
link:
www.statuspro.com/doc/Formulare/FORM_RepairCalibration_1032_E.pdf
Advice
To be able to identify the equipment when seeking advice always
quote the serial number of the equipment. The manufacturer does
not accept any responsibility for damage incurred through incorrect
maintenance carried out by non-authorized personnel.
SAFETY INSTRUCTIONS
To Next Page
Loading...