20
EN
Introduction
These operating instructions explain the touch probe P100 (Item 12960) and inform you about the correct handling
of the product. Please read these operating instructions as well as all accompanying documents in their entirety before
commissioning of the system in order to become familiar with the characteristics and the operation of the product. The
improper operation of the CNC gantry milling system can lead to damage to the product and property and can cause
serious injuries, electric shock and / or re. It is imperative to adhere to the safety instructions listed in these operating
instructions at all times. Should any doubts or the need for further information arise, do not hesitate to contact us prior
to the commissioning of the product. You can nd our contact details on the cover sheet or in chapter „9 Contact“.
You can order the separately available accessories from our online shops:
The contents of these operating instructions are the intellectual property of the STEPCRAFT GmbH & Co. KG.
Forwarding or copying (also in excerpts) is not allowed without our explicit and written authorization. Any infringements
are prosecuted.
COPYRIGHT
Shop EU and rest of world Shop USA
https://shop.stepcraft-systems.com/ https://www.stepcraft.us/
To Next Page
Loading...