33
EN
Prior to commissioning the CNC gantry milling system, it has to be ensured that the machine is in a technically perfect
and well-maintained condition. Always ensure that the machine is set currentless if you want to perform adjustment or
maintenance works. For this purpose, disconnect the power plug. Please make sure to set system-guided tools with own
power supply currentless as well! Unclamp sharp-edged cutting tools. There is a very high risk of injury from clamped
milling tools. Remove workpieces xed on the machine table together with the respective fastening elements. Only tools
of high quality are to be used.
7 Maintenance
NOTICE
Maintain the tool. Check for torsion or bending. breakage of parts and any other conditions that may affect
the tool's operation. If damaged, have the tool repaired before use. Many accidents are caused by poorly
maintained tools.
8 Spare Parts
All parts of the product can be purchased individually as spare parts. Please contact us directly or use our online shop to
order the part. You can nd our contact details on the cover sheet or in chapter „9 Contact“.
9 Contact
10 Limited Manufacturers Warranty
Beside the legal warranty STEPCRAFT offers you a manufacturer defect-free warranty for our own manufactured devices.
In the unlikely event of having a warranty case of a third-party product, the individual manufacturers warranty will take
place. Follow these links / QR-codes to read the terms and conditions of our manufacturers warranty.
Country of purchase
STEPCRAFT Address Phone and E-Mail Management
Germany & rest of
world
STEPCRAFT
GmbH & Co. KG
An der Beile 2
58708 Menden
Germany
+49 2373 179 11 60
info@stepcraft-systems.com
Markus Wedel,
Peter Urban
USA & Canada Stepcraft Inc.
151 Field Street
Torrington, CT 06790
USA
+1 203 556 1856
info@stepcraft.us
Erick Royer
Germany English EU English USA
https://shop.stepcraft-systems.com/
Garantiebedingungen
https://shop.stepcraft-systems.com/
Manufacturers-warranty
https://www.stepcraft.us/warranty
To Next Page
Loading...